Sometimes it’s less film., a stronger film., no corner boards., a faster cycle.
Test at your customer’s wrapper. Leave with a branded report that proves the saving.
14 days free · Card required · Cancel anytime
One app
Your packaging assistant. On every device, for every setting.
Test at the wrapper on a phone, compare on a tablet, report from any computer. Sealy, the AI assistant in the app, answers questions on the spot.
Example conversations with Sealy
- You: The app shows a lower pre-stretch than the machine is set to, and the grams per pallet are high. Why?
- Sealy: Most likely the film is slipping on the pre-stretch rollers. Check: 1. Is the roll mounted the wrong way round? Turn it. 2. Are the rollers dirty or worn? Clean or service them. 3. Both fine? Then the film's stated pre-stretch is wrong. Correct it in the app. Then wrap a new pallet and weigh the film again.
- You: I'm at a Robopac Genesis Futura 2, downgauging from 12 to 10 micron. I can't get enough containment force with the thinner film.
- Sealy: This ring wrapper has a retrofitted automatic roping system. Your test also shows the 10 micron film is still below the green zone, so it isn't pre-stretched enough to lock the load. Your photo shows boxes. Film that isn't fully pre-stretched keeps an elastic memory: it pulls back and can crush the box corners within 24 hours. Try this: 1. Pre-stretch to around **290 %** and check that the film holds the corners without breaking. 2. Rope the film on the way up, and turn roping off on the way down, so all wraps overlap. Run that cycle and tell me how the load holds. If it still isn't right, we'll try another setting.
- You: Hi, I have a question about our C-Meazure order, #3082.
- Sealy: Happy to help. What would you like to know about order #3082?
- You: What's the current lead time?
- Sealy: I'll connect you with a person from the Palletseal team.
- Isabella joined the chat
- Isabella: Hello! I've checked with production. They're finishing the paint, and QC has approved it. It ships by international courier within 2 days, so you'll have it early next week. I'll send you the tracking number once it's on its way. Anything else I can help with today?
Sealy is powered by Claude, from Anthropic. It answers from Palletseal's own knowledge, shows its sources and is always marked as an AI. When a question needs a person, our team takes over in the same chat.
Built on the Claude API from Anthropic, with Palletseal's own knowledge.
Palletseal's knowledge in your own AI tools, through MCP.
Suggestions for film and settings, with setup help from the machine maker's manual.
Encrypted, with roles for reps, managers and admins.
Customer data stored in Frankfurt. Our team signs in with two-factor authentication.
Why Palletseal
Built for the test, not the spreadsheet.
Palletseal
RecommendedMeasured at the customer’s wrapper.
- One guided test, step by step, for every rep
- The same method and data across sellers and sites
- Tilt, containment force and EUMOS 40509 acceleration tests in one report
- Branded report before you leave
- Insights for sales directors: KPIs, pipeline and results per rep
- Sealy, AI assistance built on decades of combined industry experience
Spreadsheets and guesswork
How most film tests are still done.
- Every rep tests their own way
- Results you can’t compare across sites
- A pull gauge at best, no tilt or acceleration test
- Notes on site, report written back at the office
- No KPIs for the sales director
- No expert to ask at the wrapper
What one line can look like. Demo customer, one wrapper, one year.
- 01Film cost saved per year
- €20,325
- 02Less stretch film per year
- 11,662 kg
- 03CO₂e avoided per year (est.)
- 28.5 t
Demo data. CO₂e is an estimate.
Load stability
A saving only counts if the load still holds.
Tilt the pallet with a forklift and scan its labels with a phone or tablet. Read containment force from your own gauge. Both results go into the report.
How the load test works →Tilt0.0°
Deformation–
✓ Load held
01
Tilt.
Lift one side with a forklift and scan the labels before and after.
02
Containment force.
Read it from the gauge you already use.
Have Palletseal’s SwiftBench or C-Meazure? Their results load straight in.
Pricing
Pay per user. Start in minutes.
Prices per user per month, excl. VAT. For businesses only. Quarterly and yearly are billed up front.
Seller
For reps who test at customers.
€150per user/month
- Customers, tests and reports
- Film tests with pre-stretch and red–amber–green scale
- Tilt and containment force tests
- Cost, estimated CO₂e and machine payback
- Branded PDF reports in 25 languages
- Phone, tablet and browser
Manager
For sales leaders who test and lead the team.
€200per user/month
- Everything in Seller
- Insights across the whole team
- See every rep's customers, tests and reports
Questions buyers ask.
What does Palletseal actually measure?
Pre-stretch (from revolutions and the measured film weight), film use per pallet and per year, and load stability through tilt, containment force and – with Palletseal equipment – acceleration bench and C-Meazure tests. From that it calculates the cost per year and estimates the CO₂e for the customer's current film and yours.
What equipment do I need?
A phone or tablet for tests on site, and any computer with a browser for reports and Insights. You also need a scale to weigh the film used. Only the acceleration test needs more: Palletseal’s SwiftBench and an iPad recording in Slo-mo (at least 80 fps, as EUMOS 40509 requires).
How is the CO₂e figure calculated?
It is an estimate: film saved per year × a CO₂e factor per kg film. The default factor is 2.97 kg CO₂e per kg film, the generic value for new LDPE and LLDPE in the UK government's GHG conversion factors 2025. Always ask the film producer for its own figure, and change the factor per film. The factor used is printed in the report.
Can the report carry our brand?
Yes. Your logo, colour and company name appear in the app and on every report, for everyone in your organisation. Reports can be produced in the customer's language (25 languages).
How does the free trial work?
You get 14 days with full access. A card is required at sign-up, so your team keeps working without interruption. We email you a reminder 7 days before the trial ends. Cancel online before the trial ends and you pay nothing; otherwise the subscription starts automatically with the seats and billing period you chose.
Why do you need a card for the trial?
So the switch from trial to paid happens without a break in the middle of a customer week. Cancel online at any time during the 14 days and you won't be charged.
Start your 14-day trial today and send your first branded report this week.
14 days free · Card required · Cancel anytime